> For the complete documentation index, see [llms.txt](https://docs.geopard.tech/geopard-tutorials/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.geopard.tech/geopard-tutorials/cze/prohlidka-produktu-webova-aplikace/john-deere-operations-center-integration/11.-synchronize-a-field-with-john-deere-operations-center.md).

# 11. Synchronizovat pole s John Deere Operations Center

Na vyžádání odešlete jedno pole do John Deere Operations Center a mějte jeho hranici i hierarchii stále aktuální.

GeoPard umožňuje na vyžádání synchronizovat jedno pole s John Deere Operations Center.

Použijte tuto funkci hned po přidání pole. Znovu ji použijte po změně hranice pole nebo po aktualizaci hierarchie zákazníka a farmy.

GeoPard automaticky rozhodne, zda pole v John Deere Operations Center vytvoří, nebo znovu synchronizuje již existující pole. Nemusíte předem zjišťovat jeho aktuální stav.

{% hint style="info" %}
Akce **Synchronizovat pole s John Deere Operations Center** se zobrazí pouze tehdy, když je váš účet GeoPard propojený s John Deere. Pokud ji nevidíte, dokončete postup [Propojení s John Deere Operations Center](https://docs.geopard.tech/geopard-tutorials/product-tour-web-app/john-deere-operations-center-integration/2.-connect-to-john-deere-operations-center).
{% endhint %}

### Než začnete

Synchronizace vyžaduje dva kroky nastavení. Pokud některý z nich chybí, synchronizace se nezdaří.

#### 1. Namapujte štítky GeoPard na hierarchii John Deere

GeoPard organizuje pole pomocí štítků. John Deere používá hierarchii **Organizace → Zákazník → Farma** .

Na stránce integrace s John Deere namapujte štítky GeoPard na tyto úrovně John Deere:

* `organization` → Organizace
* `client` → Zákazník
* `farm` → Farma

<figure><img src="https://1171283066-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYICBELdyAXXebKAzfLOR%2Fuploads%2FRJJJaF5XqblEZPKAH396%2FScreenshot%202026-06-25%20at%2012.51.00.png?alt=media&amp;token=c4b61353-e515-487b-9449-efb5f3d19777" alt=""><figcaption></figcaption></figure>

Pokud odpovídající štítek ještě neexistuje, nejprve ho vytvořte. Viz [Přidání štítku](https://docs.geopard.tech/geopard-tutorials/product-tour-web-app/farm-and-field-setup/add-a-label).

#### 2. Přidejte k poli odpovídající štítky

Otevřete pole a zkontrolujte část **Podrobnosti o poli** → **Štítky**.

Pole musí obsahovat hodnoty odpovídající vašemu mapování. Například:

* `organization: AgriCore Solutions`
* `client: GreenField`
* `farm: Green Valley Farm`

Tyto hodnoty zařadí pole do správné cesty **Organizace → Zákazník → Farma** v John Deere Operations Center.

<figure><img src="https://1171283066-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYICBELdyAXXebKAzfLOR%2Fuploads%2FFY7EHZuLv3qvd0WJ9tmT%2FScreenshot%202026-06-25%20at%2013.07.19.png?alt=media&amp;token=7c678a1b-5e8a-463c-b58c-ae1905cd2c34" alt=""><figcaption></figcaption></figure>

### Synchronizace pole

1. Otevřete pole, které chcete odeslat do John Deere Operations Center.
2. Klikněte na **Export** → **Synchronizovat pole s John Deere Operations Center**.
3. Počkejte na oznámení o výsledku.

<figure><img src="https://1171283066-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYICBELdyAXXebKAzfLOR%2Fuploads%2FKqGxEBcx1g4uJWrCnLl3%2FScreenshot%202026-06-25%20at%2013.07.33.png?alt=media&amp;token=4fcb3b37-5d1f-4b3d-8cd1-e36d37983cee" alt=""><figcaption></figcaption></figure>

### Co se stane po kliknutí na akci

GeoPard zkontroluje, zda je pole už propojené s John Deere Operations Center.

* Pokud pole v John Deere Operations Center ještě neexistuje, GeoPard ho automaticky vytvoří podle štítků farmy a zákazníka.
* Pokud pole v John Deere Operations Center už existuje, GeoPard během synchronizace automaticky aktualizuje jeho hranici a údaje o farmě a zákazníkovi.

<figure><img src="https://1171283066-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FYICBELdyAXXebKAzfLOR%2Fuploads%2F3XwCJcMtgyexiv72sAWZ%2FScreenshot%202026-06-26%20at%2010.06.16.png?alt=media&amp;token=77734d9a-ef48-4a18-9215-f0e7d2ccccc4" alt=""><figcaption></figcaption></figure>

### Zobrazené výsledky

Po dokončení akce GeoPard zobrazí jedno z těchto oznámení:

* **Pole vytvořeno v John Deere Operations Center** — pole nebylo propojené s John Deere a úspěšně se vytvořilo.
* **Pole znovu synchronizováno s John Deere Operations Center** — pole už bylo propojené a jeho hranice i hierarchie se aktualizovaly.
* **Synchronizace se nezdařila** — pole se nepodařilo synchronizovat.

### Řešení problémů

Pokud se synchronizace nezdaří, nejprve zkontrolujte následující:

* Váš účet GeoPard je propojený s John Deere. Další informace najdete v části [2. Propojení s John Deere Operations Center](https://docs.geopard.tech/geopard-tutorials/product-tour-web-app/john-deere-operations-center-integration/2.-connect-to-john-deere-operations-center).
* Vaše organizace John Deere je v GeoPard povolená. Další informace najdete v části [3. Propojení s organizacemi John Deere](https://docs.geopard.tech/geopard-tutorials/product-tour-web-app/john-deere-operations-center-integration/3.-connect-to-john-deere-organizations).
* Pole má přiřazené všechny štítky a jejich hodnoty jsou správné.
* Mapování štítků odpovídá zamýšlené cestě **Organizace → Klient → Farma** .

Nejčastější příčinou selhání jsou chybějící nebo nesprávně přiřazené štítky pole.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.geopard.tech/geopard-tutorials/cze/prohlidka-produktu-webova-aplikace/john-deere-operations-center-integration/11.-synchronize-a-field-with-john-deere-operations-center.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
